Engine  | | Model | D180.000-1 | | | Type | four-stroke diesel engine with turbo charging and direct fuel injection | | | Operating power, kW (hp) | 132(180) | | Transmission The hydraulic mechanical transmission is equipped with the planetary gearbox and single-stage torque converter. It provides with three forward and three reverse gears. Running Gear | | Number of bogie wheels at each side | 6 | | | Number of carrier rollers at each side | 2 | | | Width of track shoe, mm | 500 | | | Tightening device | hydraulic | | | Specific ground pressure, kg/cm2 | 0,74 | |
| | Gear | Traverse speed, km/h | | forward | reverse | | I | 0 ... 3,5 | 0 ... 4,22 | | II | 0 ... 6,03 | 0 ... 7,31 | | III | 0 ... 10,09 | 0 ... 11,11 | | | Hydraulic System The hydraulic system is a separate-unit one with gear-type pump. The pump is driven from the engine timing gear. The system pressure is 16 MPa. Pull Winch | | The pull winch ЛТ25.01 comprises a frame, a winch with rope, a hydraulic motor with control block, a bracket with upper support roller and a protective casing. | | | Diameter of applied ropes, mm | 18-27 | | | Rope length, m | 40-70 | | | Maximum winch pulling force, t | 20 | | | Rope take-up speed, m/s | 0,24 | | Bulldozer Equipment | | Blade type | straight, with tilt hydraulic cylinder | | | Drawing prism volume, cubic meters | 3,8 | | | Width, mm | 3420 | | | Height, mm | 1310 | | | Maximum lifting, mm | 1020 | | | Maximum deepening, mm | 440 | | Overall Dimensions | | Length, mm | 6485 | | | Width, mm | 3450 | | | Height, mm | 3110 | | | Gauge, mm | 1880 | | | Base, mm | 2880 | | Weight, kg 21500
|
